Overseas Compliance & Import Guide

Importing Used Machinery to Vietnam: Decision 18/2019/QD-TTg Age Limit & Inspection Guide

Updated:

A practical compliance guide for Vietnamese manufacturers and service centers importing second-hand coil slitting, cut-to-length, and rolling mill machinery under Prime Minister Decision 18/2019/QD-TTg, covering the mandatory 10-year age limit, accredited pre-shipment inspection (PSI), QCVN standards, and customs clearance protocols at Hai Phong and Cat Lai ports.

Review the inspection steps

Engineering Inspection Protocol

Step-by-step physical inspection guide

A hands-on engineering guide to evaluate mechanical integrity, wear tolerances, hydraulic circuits, and control systems before committing capital or travel.

Importing Used Machinery to Vietnam: Decision 18/2019/QD-TTg Age Limit & Inspection Guide
Figure 1.0 Equipment inspection verification in workshop environment.
Step 01 Stage 01: Pre-Audit

Confirm Decision 18/2019/QD-TTg applicability for coil processing equipment

Under Decision No.

  • 18/2019/QD-TTg issued by the Vietnamese Prime Minister, used machinery, equipment, and technological production lines imported into Vietnam must directly serve enterprise manufacturing activities and comply with strict statutory age, safety, and environmental criteria.
  • Coil processing machinery—such as slitting lines, cut-to-length lines, and cold rolling mills—falls under regulated capital goods.
  • Knowing whether your candidate equipment satisfies statutory import prerequisites avoids costly shipment delays or re-export orders.
Step 02 Stage 01: Pre-Audit

Calculate the mandatory 10-year machine age limit

Under Article 6 of Decision 18/2019/QD-TTg, imported second-hand machinery must not exceed 10 years of age at the time of import declaration.

  • The age is calculated as: Import Year minus Manufacturing Year <= 10.
  • For instance, for an import declaration in 2026, the equipment must have been manufactured in 2016 or later.
  • The manufacturing year must be stamped clearly on the original factory metal nameplate and corroborated by the manufacturer's original specification sheet, commercial invoices, or original technical dossiers.
Step 03 Stage 02: On-Machine Audit

Verify technical safety, remaining capacity, and QCVN standards

The imported equipment must be manufactured in compliance with Vietnamese National Technical Regulations (QCVN) or technical standards of G7 nations or South Korea regarding operational safety, energy efficiency, and environmental emissions.

  • In addition, statutory regulations mandate that the operational performance and remaining design capacity of the used line must reach at least 85% of its original design capacity.
  • Equipment showing catastrophic frame cracks or missing core drive units will fail inspection.
Step 04 Stage 02: On-Machine Audit

Coordinate with accredited Pre-Shipment Inspection (PSI) bodies

To clear Vietnamese customs smoothly, an inspection certificate (Chung thu giam dinh) issued by an inspection body designated or recognized by Vietnam's Ministry of Science and Technology (MOST) is required.

  • Accredited inspection organizations (such as Vinacontrol, SGS, Quatest, or authorized overseas appraisal partners) conduct on-site physical audits at our Foshan facility.
  • The inspection verifies machine identity, component serial numbers, manufacturing year, and operational safety before container stuffing.
Step 05 Stage 02: On-Machine Audit

Assemble customs clearance dossier for Hai Phong and Cat Lai ports

The mandatory customs dossier submitted through Vietnam's National Single Window (NSW) / VNACCS includes: the commercial invoice, packing list, bill of lading, Certificate of Origin Form E (granting preferential tariff exemptions under the ASEAN-China Free Trade Agreement ACFTA), import customs declaration, and the original inspection certificate confirming compliance with 18/2019/QD-TTg.

  • Proper classification under HS codes 8455 or 8462 ensures correct valuation and duty processing.
Step 06 Stage 03: Performance & Commercials

Execute factory trial run and pre-export refurbishment in Foshan

Before the appraisal agency conducts its physical audit, our Foshan workshop performs complete machine servicing: precision guideway alignment, hydraulic seal and pressure valve testing, electrical cabinet safety inspection, and under-power trial running with strip coil.

  • A high-definition running video, electrical schematics, and complete spare parts catalog are recorded to accompany the customs dossier and facilitate rapid post-arrival installation in industrial parks around Bac Ninh, Hai Duong, Binh Duong, or Dong Nai.
Step 07 Stage 03: Performance & Commercials

Follow the chronological import clearance roadmap

A disciplined import workflow ensures predictable delivery: 1) Machine screening and nameplate manufacturing age audit; 2) Workshop trial running and parameter sign-off; 3) Accredited PSI appraisal inspection at the China facility; 4) Professional moisture-proof container stuffing and Form E application; 5) Electronic customs pre-declaration via VNACCS; 6) Port customs examination and cargo release at Cat Lai or Hai Phong; 7) Factory installation and commissioning.

Move from inspection points to a machine review

Use these checks to narrow the review, then confirm availability, supplier evidence or the right quotation route with your real process window.

Planning to import used coil processing equipment to Vietnam?

Send your required coil width, thickness, and destination port (Hai Phong, Cat Lai) to verify machine age eligibility, arrange accredited PSI inspection, and secure Form E tariff benefits.

Send Inquiry