High-Speed Rotary Shear Engineering

Precision Coil Slitting Lines

Design-to-order high-speed coil slitting lines engineered from CAD blueprints with quick-change dual knife heads, precision ground arbors (runout <=0.005mm), active hydraulic tension pads, and Siemens/Rexroth automation.

Review typical project scope.

Typical Requirements

Double-knife slitting machine head for strip processing
Process Range
Custom process range

Define thickness range, working width, strip program, coil weight, line speed and burr control target around your actual production requirement.

Process RangeSpec WindowBurr Control
Precision slitting line in the production workshop
Automation
Automation and controls

Plan the right level of automation, electrical standard, drive platform, safety logic and operator interface instead of adapting to an older control system.

AutomationControl PlatformSafety Logic
new slitting line scope review visual
Layout Fit
Plant integration

Coordinate entry direction, recoiling layout, scrap handling, pit arrangement, downstream packing or stacking and utility conditions before project scope is fixed.

Layout FitPlant IntegrationUtility Conditions
new slitting line scope review visual
Support Scope
Long-term support planning

Use the project stage to clarify parts philosophy, maintenance expectations, commissioning support and future expansion direction.

Support ScopeCommissioning PlanFuture Expansion

Technical Capacity

Coil Slitting Line Technical Capacity & Specifications

Use these ranges for initial planning. Final values depend on material grade, strip program, coil weight, tooling and the required production speed.

SpecificationLight Gauge LineMedium / Heavy Gauge Line
Material Thickness Window0.2mm – 3.0mm3.0mm – 14.0mm / 16.0mm
Usable Strip Width Range650mm – 1,600mm1,000mm – 2,000mm
Max Number of SlitsUp to 30 cuts (at 0.5mm)Up to 12 cuts (at 8.0mm)
Operating Line Speed80 – 180 m/min40 – 90 m/min
Cutter Arbor DiameterΦ160mm – Φ220mm (Cr12MoV/H13)Φ260mm – Φ360mm forged alloy
Arbor Radial Runout Accuracy≤ 0.005mm (Precision Class)≤ 0.008mm (Heavy Class)
Slit Width Tolerance±0.05mm±0.10mm

Send these details for technical review

Share the material and size range you know. We can discuss missing specifications and compare suitable new, used or refurbished equipment.

  • Strip Material & Yield: Specify carbon steel (Q235/Q355), stainless steel (304/316/430), or silicon steel, plus yield strength (MPa).
  • Coil Dimensions & Weight: Coil OD (max 2,000mm), ID (508mm/610mm), strip width range, and maximum single coil weight (up to 35 tons).
  • Thickness Window & Slit Program: Minimum and maximum thickness, minimum slit width, and maximum number of simultaneous cuts.
  • Automation Level: Choose single slitter head or twin interchangeable cutter heads (5-min rapid tooling changeover).
  • Recoiling & Tension Type: Select hydraulic tension pad, belt bridle, or pneumatic separator disc tension stand.
  • Downstream Offloading: Confirm turnstile unloader arms, coil downender, or automatic circumferential strapping requirements.

Discuss a new slitting line project

Send your thickness range, coil width, coil weight, strip program, output goal and destination country to compare a new slitting line project with current used alternatives.

Send Inquiry