Coil processing machinery workshop with machining and refurbishment capability Factory workshop ยท Foshan, China

Refurbishment, Parts & Technical Service

Machining, Turnkey Overhaul & Technical Service

In-house heavy CNC machining, on-site engineering inspections, and turnkey line overhaul for used metallurgical equipment.

Send photos, a drawing or the machine model with your destination for an initial review.

Core Engineering Capabilities

Heavy Machining, Turnkey Rebuilds & Technical Services

From on-site pre-purchase engineering risk audits to complete workshop CNC machining and turnkey line rebuilds.

Turnkey overhaul and factory reassembly of client-sourced rolling line
Turnkey Overhaul

Third-Party Sourced Line Turnkey Overhaul

Turnkey overhaul service for overseas buyers purchasing machinery from domestic steel plants. We manage the full project: site inspection, match-marked dismantling, workshop machining on our heavy CNC gantry center (2500x6000mm, 20t) and 6000mm bed lathes, electrical retrofit, and FAT test-run.

  • On-site mechanical risk inspection before fund transfer
  • Full workshop rebuild, arbor regrinding, and in-house heavy CNC machining
On-site mechanical tolerance inspection measuring spindle runout with dial gauge
Engineering Inspection

5-Point Pragmatic Engineering Inspection Report

Hands-on engineering audits by senior mechanical engineers. We deliver an objective 5-point report recording arbor radial runout (<=0.008mm), gearbox gear flank wear, and hydraulic valve manifold integrity.

  • Dial indicator runout measurement (radial tolerance <=0.008mm)
  • Open-gearbox tooth pitting review and cylinder leak test
Heavy 10m x 4m CNC gantry milling center remachining metallurgical machine frames
Heavy Machining

In-House Heavy CNC Machining Infrastructure

In-house machining backbone: 10m x 4m CNC moving-beam gantry mill, 6m CNC vertical turning lathe, and floor boring center. Re-machines worn machine bed slide ways, bearing housings, and coiler expanding mandrels.

  • 10m x 4m table for single-setup multi-face precision frame milling
  • 6m vertical turning lathe for expanding mandrels and large gears
Custom alloy rotary knives, stripper rings and replacement wear components
Parts & Adaptation

Custom Machining, Tooling & Voltage Adaptation

Custom spare parts reverse engineering from worn samples. Supply of consumable tooling packages (rotary knives, PU rings, shims) and export power grid voltage adaptation (380V/415V/440V/480V isolation transformers).

  • Shafts, bronze liners and gears manufactured to drawing
  • Export power transformer integration and English touchscreens

Risk Mitigation & Technical Due Diligence

The 5-Point Engineering Inspection Report Standard

When overseas buyers source used metallurgical lines across domestic steel mills, our senior mechanical engineers provide a transparent physical audit. We reject high-tech marketing gimmicks and focus strictly on 5 pragmatic mechanical health indicators:

Dial indicator runout measurement on slitter cutter arbor
Point 01 | Mechanical Tolerances
Key Geometric Runout & Slide Way Wear

Physical dial indicator measurement of cutter arbor radial runout (≤0.008mm benchmark), bed guide parallelism, and leveling cassette roll gap consistency.

Open gearbox visual inspection of gear teeth wear and backlash
Point 02 | Transmission & Gearing
Gearbox Internal Inspection & Backlash

Uncovering top gear covers to visually check tooth flank pitting, root crack indications, gear mesh backlash, and high-load transmission abnormal noise during dry-run.

Bearing radial clearance and housing bore check
Point 03 | Bearing & Rotating Elements
Bearing Clearances & Housing Coaxiality

Checking mandrel main bearings, uncoiler drum swivel joints, and slitter arbor spherical roller bearing radial play, lubrication state, and operating temperature rise.

Hydraulic valve manifold and high-pressure cylinder leak audit
Point 04 | Hydraulic & Pneumatic Valves
Valve Manifold Integrity & Cylinder Leaks

Thorough inspection of proportional valves, hydraulic power unit (HPU) pump flow delivery, cylinder piston rod scoring, internal bypass leaks, and piping condition.

Electrical control cabinet wiring, PLC modules and blueprint audit
Point 05 | Electrical & Documentation
Control Cabinet, PLC & Original CAD Drawings

Verification of existing PLC hardware (Siemens/Mitsubishi), main drive DC/AC inverters, operator consoles, and availability of original electrical/hydraulic schematic blueprints.

Overhaul quotation and precision remachining scope definition
Deliverable | Written Inspection Report
Signed Engineering Report & Overhaul Scope

Within 48 hours of site audit, you receive a full photographic report with verified tolerance data and an itemized turnkey overhaul proposal (Option A As-Is vs. Option B Rebuilt).

Mechanical equipment condition review in the factory
Inspection
Used equipment inspection

Review media and machine scope before payment.

Photos & VideoScope CheckRisk Review
Mechanical sections under condition review before refurbishment
Mechanical
Mechanical refurbishment review

Prioritize wear parts, hydraulics and tooling.

Wear PartsHydraulicsTooling
Machined replacement components for fit and dimension check
Parts Supply
Spare parts and wear parts supply

Confirm fit before quotation.

Drawing or dimensionsPhoto or machine modelMaterial and quantity
Refurbished drive assembly for control upgrade planning
Controls
Electrical and control upgrade planning

Check motors, drives, PLC and drawings.

PLC & DrivesCabinet StatusUpgrade Budget
Factory workshop for dismantling and handling coordination
Dismantling
Dismantling and loading support

Mark sections, label cables and plan packing.

Cable LabelingPacking PlanSite Handoff
Coil processing machinery workshop for service coordination
Shipping
Shipping and export coordination

Match loading, route and documents to the shipment.

Container/TruckRouteDocuments
Rebuilt drive assembly for commissioning discussion
Commissioning
Installation and commissioning discussion

Confirm startup, training and spare-parts scope.

Startup PlanTrainingSpare Parts

Refurbishment Evidence

Mechanical repair and fit-check references

Representative refurbishment work used to discuss condition, repair scope and parts fit before shipment.

Drive-side equipment component during refurbishment
Refurbishment Detail
Drive-side refurbishment

Use current condition photos to identify repair scope, missing parts and mechanical work before quotation.

Condition photosRepair scopeParts check
Machine base and frame under refurbishment
Mechanical Work
Base and frame repair

Mechanical condition review can focus on frame, foundation surfaces, shafts and other restart-critical areas.

Mechanical reviewFrame conditionRestart scope
Equipment section being prepared for refurbishment
Overhaul
Machine section overhaul

Separate essential repair work from optional cleanup so the refurbishment plan stays commercially clear.

Repair planBudget clarityMechanical scope
Equipment assembly prepared for fit and alignment review
Fit Check
Assembly and fit check

Confirm parts fit, alignment and the included assembly scope before shipment or restart planning.

Parts fitAlignmentShipment prep

Coil processing equipment refurbishment scope

Refurbishment starts with the condition of the particular machine and the required production program. Separate repairs that restore existing function from upgrades intended to change capacity, controls or output quality. Coilmill reviews the scope before quotation.

Swipe or scroll horizontally to compare all specifications.

Coil processing equipment refurbishment scope
AreaInspection and possible workInformation needed
Mechanical and toolingAssess shafts, bearings, rolls, knives, spacers, gearboxes and alignment; plan repair or replacement where requiredNameplate, wear photos, dimensions and material program
Tension and recoilingAssess belts, rolls, drum expansion, strip tracking and coil-build stabilityRunning video and reported tension or coil defects
HydraulicsReview leaks, cylinders, valves, pump condition and operating pressureHydraulic drawings, fault history and pressure readings if available
Electrical and controlsReview motors, drives, PLC/HMI, wiring, sensors and available backupsCabinet photos, electrical drawings, supply voltage and fault codes
Commissioning and acceptanceDefine no-load checks, material-loaded trial, output measurements and safety interlock checksTrial material, quality targets and agreed acceptance record

Refurbishment cost, schedule and acceptance

Cost and timing depend on wear, missing parts, spare-part lead times, controls scope and the available shutdown window. Request a project quotation rather than assuming a fixed percentage of new-machine cost or a universal turnaround time.

Compare total installed cost: equipment, inspection, repairs, tooling, dismantling, freight, foundations, electrical work, installation, commissioning and expected maintenance or downtime. Use the same production volume and quality target for used, refurbished and new alternatives.

A published Fagor modernization at Acerinox Langenfeld was carried out in two phases during separate summer shutdowns. It changed feeding, leveling, shear, stacking and controls, raising that line from 30 to 90m/min. This illustrates project-specific modernization scope; it is not a promised Coilmill upgrade result.

  • Send the machine nameplate, current photos, running or fault video and available drawings.
  • State the existing problem, target material range and whether restoring function or improving performance is the priority.
  • Agree trial material, speed, measurements and acceptance conditions before the work starts.

Technical references

Public manufacturer information and equipment examples reviewed on 2026-10-11. Reference specifications describe the cited equipment; Coilmill confirms project scope and performance through inquiry.

Refurbishment Modules

Pre-shipment service review

Key checks before shipment.

Electrical cabinet and control review

Check cabinet, wiring, PLC, drives and motors. Our dedicated assembly bay supports simultaneous build and test of 6-8 enclosure panels (2200x1000x800mm each) with multi-axis PLC automation and high-power inverter drive synchronization.

  • PLC, drive and cabinet status
  • Motor and wiring condition
  • Drawing and spare-part availability
  • 50Hz to 60Hz cross-border electrical grid compatibility and transformer retrofit

Hydraulic and lubrication review

Check hydraulics, hoses, leakage and seals.

  • Hydraulic station and cylinder condition
  • Oil leakage and hose status
  • Lubrication and seal replacement needs

Slitter shaft, knife and spacer review

Check shafts, knives, spacers, recoiler and scrap handling. Our workshop utilizes heavy long-bed horizontal lathes (center distance 6000mm, swing 1250mm) and cylindrical grinding to verify arbor concentricity and radial runout within 0.005mm.

  • Slitter shaft and bearing condition
  • Knife, spacer and separator scope
  • Recoiler and scrap handling review
  • In-house 6000mm bed lathe machining for arbor runout restoration

Roll and leveling section review

Check rolls, bearings, controls and visible wear. Heavy mill housings and bearing chocks (up to 550mm bore, 2.0t/chock) are realigned and precision re-bored on our 20-ton capacity CNC gantry machining center.

  • Leveling roll or mill roll surface
  • Bearing and drive-side condition
  • AGC, S-roll or leveling control scope
  • CNC gantry milling (2500x6000mm bed) for mill housings and roll chocks

Dismantling, marking and loading

Plan labeling, lifting, packing and loading.

  • Cable and section labeling
  • Lifting and loading route
  • Container, truck or flat-rack planning

Installation and restart support

Confirm foundations, utilities, assembly and startup support.

  • Foundation and utility requirements
  • Assembly and startup sequence
  • Remote or onsite commissioning support

Buyer Decision

When to use this service

Use this service when machine condition, upgrades or shipping scope affect the project.

Use service review before pricing becomes final

Use when condition, missing parts or loading are unclear.

Before quotationCondition reviewScope clarity

Use refurbishment review when the used-versus-new decision is still open

Use when a restart-ready used line may be a better fit than new.

Used vs newRestart-ready scopeBudget control

Use loading and startup planning when logistics risk is larger than machine price

Use when loading or startup risk is high.

Loading routeStartup riskExport support

Project Flow

Service steps

01

Machine Sourcing & Technical Brief: Send the location, machine type, photos, or plant details of the target second-hand line (whether from our inventory or third-party plant).

02

On-Site Engineering Inspection: Our mechanical engineer conducts an on-site physical inspection and issues a transparent 5-Point Engineering Inspection Report with dial gauge measurements and gearbox photos.

03

Scope Alignment & Overhaul Contract: Agree on the practical overhaul boundaries: guide remilling, arbor grinding (<=0.005mm), bearing replacement, or complete Siemens TIA electrical upgrade.

04

Factory Dismantling & Workshop Transfer: Line is meticulously match-marked, photographed, dismantled, and transported to our Foshan heavy machining workshop.

05

Heavy CNC Machining & FAT Pre-Assembly: Base frames are remachined on our 10m gantry mill, new bearings fitted, hydraulic cylinders resealed, and FAT dry-run conducted.

06

Export Anti-Corrosion & Container Lashing: VCI vapor corrosion inhibitor treatment, double-layer heavy tarpaulins, 40FR / 40OT flat rack container structural steel welding and worldwide shipping.

Send these details first

Send photos, size range, coil weight, destination and the main problem.

Machine photos or videoMaterial rangeDestination country