4-High / 6-High AGC Cold Rolling Engineering

Cold Reversing Rolling Mills & Levelers

Custom cold rolling mills and tension leveling lines engineered with rigid cast housings, hydraulic AGC screw-downs, positive/negative roll bending, and Siemens drive architectures for high-tolerance strip reduction.

Review typical project scope.

Typical Requirements

Twenty-high rolling mill for precision strip reduction planning
Process Target
Define the real reduction or flatness target

Set material grade, entry thickness, finished thickness or flatness target, strip width, coil weight and target speed around the actual production requirement.

Process TargetTolerance WindowMaterial Fit
Tension leveling line for strip flatness and line-scope planning
Machine Scope
Match the machine structure to the project

Clarify whether the project needs a rolling mill, a tension leveling line or a combined strip-processing route, then define stand structure, roll arrangement, S-roll scope and supporting sections.

Machine ScopeStand TypeLeveling Setup
equipment project scope review visual
Hydraulic & Controls
Control hydraulic and electrical scope early

Plan AGC or screwdown philosophy, drive platform, hydraulic station, feedback devices, PLC logic, operator interface and safety scope before quotation discussion starts.

Hydraulic & ControlsDrive PlatformSafety Logic
Multi-stand rolling mill for production layout and support planning
Plant Fit
Plan layout, utilities and long-run support

Coordinate floor space, loading direction, pit conditions, utility limits, spare-parts expectations, commissioning support and future expansion before the project scope is fixed.

Plant FitLayout DirectionFuture Support
equipment project project planning review visual
Route Split
Separate rolling and leveling decisions early

Some buyers search these together, but the real route may still split into a cold rolling mill project, a tension leveling line project or a broader line package with both process and support sections.

Route SplitMill vs LevelerProject Choice
equipment project scope review visual
Inspection & Upgrade
Keep inspection and upgrade scope visible

When a used mill or leveler is still under comparison, check AGC or screwdown condition, S-roll scope, cabinet completeness, hydraulic health and retrofit budget before treating the lower purchase price as the real project cost.

Inspection & UpgradeHydraulic RiskUsed Comparison

Technical Capacity

Coil Slitting Line Technical Capacity & Specifications

Use these ranges for initial planning. Final values depend on material grade, strip program, coil weight, tooling and the required production speed.

SpecificationLight Gauge LineMedium / Heavy Gauge Line
Strip Width Envelope650mm – 1,050mm1,000mm – 1,450mm
Entry / Exit Gauge WindowEntry 1.5 - 3.0mm → Exit 0.15 - 0.5mmEntry 2.5 - 4.5mm → Exit 0.20 - 1.2mm
Rolling Line Speed120 – 350 m/min180 – 500 m/min
Work Roll DimensionsΦ110 – Φ160mm x 750 – 1,150mmΦ140 – Φ240mm x 1,150 – 1,550mm
Intermediate / Backup RollsBackup Φ450 – Φ650mmIntermediate Φ260–Φ340mm / Backup Φ750–Φ950mm
AGC System ResponseServo-hydraulic ≤ 20msHigh-frequency servo-hydraulic ≤ 15ms
Finished Gauge Consistency±0.005mm – ±0.008mm±0.004mm – ±0.006mm (Closed loop)

Send these details for technical review

Share the material and size range you know. We can discuss missing specifications and compare suitable new, used or refurbished equipment.

  • Incoming Strip Baseline: Material chemistry, initial yield strength, starting hot band gauge, and surface finish.
  • Target Reduction Schedule: Required passes (e.g. 4 passes from 2.5mm down to 0.3mm) and final temper hardness (HV).
  • Mill Housing Stiffness: Cast steel stand column section, guide window geometry, and wedge adjustment stroke.
  • Roll Shape Control: Positive/negative hydraulic work roll bending, intermediate roll shifting (for 6-High), and coolant spray zones.
  • Left & Right Coiler Mandrel: Coiler expansion range (Φ480-Φ508mm), coiler motor kW, and hydraulic coil cars.
  • Automation Architecture: Closed-loop X-ray / isotope thickness gauges, central drive PLC, and operator pulpit consoles.

Discuss a new rolling or leveling project

Send your thickness target, strip width, process goal, automation expectation and destination country to compare a new build with current used alternatives.

Send Inquiry