Use sold references to shorten the next RFQ
Sold pages should not be treated as dead ends. They show what machine size, process range and support scope already attracted a buyer, which makes the next inquiry more specific and commercially stronger.
Sold Reference Used Slitting Line
Used 650mm Full Hydraulic Slitting Line, 0.3-4.0mm
Suitable for compact narrow-width metal coil slitting requirements, subject to technical inspection and configuration confirmation. Current location: Foshan warehouse, China. Inspection can be arranged before quotation.
This is a sold reference. Review the confirmed specs, then move to similar-machine sourcing instead of treating it as currently available.
See confirmed specs or review media and commercial notes first.
Sold Reference
Sold reference | Sold in May 2026 | 🇵🇰 Pakistan
Manufacturing year to confirm
Listed in March 2026
Running video available
Inspection available
Refurbishment support
Quick fit check
Suitable for compact narrow-width metal coil slitting requirements, subject to technical inspection and configuration confirmation
650mm0.3-4.0mmFoshan warehouse, China
What this listing covers
This used 650mm full hydraulic slitting line was installed in December 2016 and is stored in a Foshan warehouse for inspection.
- The source material lists a 0.3-4.0mm thickness range, two-roll pinch feeding, five-roll leveling with shear, 15kW pinch feeding motor, 150mm slitter shaft, 18.5kW slitter main motor, 45kW recoiler motor and DC motor drive system.
- A running video is available.
- Confirm uncoiler details, coil capacity, included tooling, electrical condition and current running status before purchase.
- 650mm full hydraulic used slitting line
- 0.3-4.0mm listed thickness range
- Two-roll pinch feeding section
- Five-roll leveling section
- Shear included according to source material
- 15kW pinch feeding motor
- 150mm slitter shaft diameter
- 18.5kW slitter main motor
- 45kW recoiler motor
- DC motor drive system
- Warehouse inspection available in Foshan
- Running video available
Used equipment in warehouse, running video available.
Commercial Review
Best fit for
Suitable for compact narrow-width metal coil slitting requirements, subject to technical inspection and configuration confirmation.
Application fitProcess rangeCommercial match
What to confirm before quotation
Uncoiler motor, coil capacity, line speed, complete supplied scope, tooling inventory and current electrical condition should be confirmed before quotation.
Current conditionMissing dataQuotation prep
Included scope to verify
The listed line includes pinch feeding, leveling and shearing sections according to source material.
- Final included knives, separator sleeves, electrical cabinet, hydraulic scope and loading scope should be confirmed during inspection.
Included PartsElectrical ScopeInspection Notes
Refurbishment Support
Need refurbishment review before shipment?
Coilmill can review electrical, hydraulic, roll, knife, bearing, auxiliary-section, dismantling and loading scope before quotation.
- Inspection before purchase
- Electrical and hydraulic review
- Refurbishment scope before shipment
- Dismantling and loading support
Buyer Route
How buyers should use this sold reference
Treat the published scope as a benchmark, then move directly into similar-machine screening, delivery timing and support review.
Best fit buyer route
Process fitCommercial fitMedia review
- Suitable for compact narrow-width metal coil slitting requirements, subject to technical inspection and configuration...
- Review 650mm and 0.3-4.0mm first.
- Use the published media to decide whether a deeper review is justified.
Product FAQ
Questions buyers usually ask about this machine
Can Coilmill source a similar 650mm hydraulic slitting line?
Yes. Send target thickness, strip width, coil weight, material and delivery destination so Coilmill can check similar narrow-width slitting lines.
What should be checked on a compact used hydraulic slitting line?
Confirm uncoiler, pinch feeding, leveling, shear, slitter shaft, recoiler, electrical drive and available running video.
What model details matter most on this Used 650mm Full Hydraulic Slitting Line, 0.3-4.0mm?
Check working width 650mm, thickness range 0.3-4.0mm, slitter shaft and knife scope, recoiler power 45kW and whether the running video matches the current machine condition.
Can this Used 650mm Full Hydraulic Slitting Line, 0.3-4.0mm fit my strip program?
That depends on your strip count, finished strip widths, coil weight to be confirmed and tooling scope. Send those details so Coilmill can check process fit before quotation.
Which listed details on this Used 650mm Full Hydraulic Slitting Line, 0.3-4.0mm should still be reconfirmed before deposit?
Reconfirm manufacturer Foshan Hengjia, year Installed in December 2016, control scope DC motor drive system, tooling completeness and whether the published motor data still reflects the current machine setup.
How should buyers use this sold Used 650mm Hydraulic Slitting Line page?
Use the published specs as a reference for similar-machine sourcing, not as a currently available offer. It is published as a sold reference (sold in May 2026, destination 🇵🇰 Pakistan). Send your target width, thickness range, coil weight and destination for a similar used machine check.
Confirmed Specs
Published technical information
Only confirmed parameters are shown here. Any omitted item should be rechecked before quotation or contract discussion.
ManufacturerFoshan Hengjia
Thickness Range0.3-4.0mm
Working Width650mm
Slitter Motor18.5kW
Recoiler Motor45kW
Drive / ControlDC motor drive system
LocationFoshan warehouse, China
Pending confirmation before quotation: Coil Capacity, Line Speed, Uncoiler Motor.
Sold Reference Review
How this sold machine should guide the next buying decision
This page is no longer a live stock page. Use the confirmed sold scope to compare current inventory, similar-machine sourcing and whether a broader project route should be reviewed.
What this sold reference proves
This sold Used 650mm Hydraulic Slitting Line page should be used as a demand-validated benchmark for similar-machine sourcing.
- It was listed in March 2026, sold in May 2026, public destination 🇵🇰 Pakistan.
- Use the published 650mm, 0.3-4.0mm and coil scope as the first benchmark before asking for similar stock.
- A separate sold case page is also available if your team wants the same reference in a cleaner case format.
Confirmed demandPublished scopeSimilar sourcing
What to compare on a similar machine
On a similar slitting line, compare slitter shaft size, tooling completeness, recoiler power, hydraulic condition, electrical cabinet status and whether the running proof still matches your strip program.
Technical fitCommercial riskInspection review
What to send before asking for similar stock
Start the first RFQ with Target strip widths, thickness range, coil weight and slit-count expectation; Destination country, preferred delivery timing and how close the replacement machine must be; Whether you want similar used stock only or also want refurbishment and new-equipment comparison included.
Target processDestinationTiming
Similar used equipment
Compare similar used equipment options before deciding whether this machine fits your material, process and installation plan.
Related buying guides
Use these guides to prepare inspection questions, review technical risk and decide whether refurbishment support is needed before purchase.
How to move this listing forward
Used equipment availability can change quickly. Send the core production requirement, preferred inspection timing and destination country first so current condition, supplied scope and export support can be checked before quotation.