Sold Reference Used Cut-to-Length Line

Used 1050mm Stainless Steel Cut-to-Length Line, 2022

Suitable for newer used cut-to-length line requirements in stainless steel sheet processing or service-center sheet preparation. Current location: Foshan Sanshui, China. Inspection can be arranged before quotation.

This is a sold reference. Review the confirmed specs, then move to similar-machine sourcing instead of treating it as currently available.

See confirmed specs or review media and commercial notes first.

Sold Reference Sold reference | Sold in May 2026 | 🇻🇳 Vietnam Manufactured in 2022 Listed in October 2025 Running video available Inspection available Refurbishment support
Source a Similar Machine Message on WhatsApp View Specs

Quick fit check

Suitable for newer used cut-to-length line requirements in stainless steel sheet processing or service-center sheet preparation

1050mmFoshan Sanshui, China

What this listing covers

This used 1050mm stainless steel cut-to-length line was manufactured by Quanfa in 2022 and is described as nearly new used equipment.

  • The line includes a 4-layer 19-roll leveling machine with 55mm leveling roll diameter and is available for inspection in Foshan Sanshui, China.
  • Confirm current running condition, material range, electrical configuration and loading plan before purchase.
  • 1050mm stainless steel cut-to-length line
  • 4-layer 19-roll leveling machine
  • 55mm leveling roll diameter
  • Cutting and sheet processing sections to be confirmed by inspection

Nearly new used equipment, in-place inspection available.

Commercial Review

used cut-to-length line application fit review visual
Fit Check
Best fit for

Suitable for newer used cut-to-length line requirements in stainless steel sheet processing or service-center sheet preparation.

Application fitProcess rangeCommercial match
used cut-to-length line quotation review visual
Quote Check
What to confirm before quotation

Detailed thickness range, coil weight and electrical configuration should be confirmed before quotation.

Current conditionMissing dataQuotation prep
used cut-to-length line scope review visual
Scope Check
Included scope to verify

Included parts and electrical configuration should be confirmed during inspection.

Included PartsElectrical ScopeInspection Notes

Refurbishment Support

Need refurbishment review before shipment?

Coilmill can review electrical, hydraulic, roll, knife, bearing, auxiliary-section, dismantling and loading scope before quotation.

  • Inspection before purchase
  • Electrical and hydraulic review
  • Refurbishment scope before shipment
  • Dismantling and loading support

Buyer Route

How buyers should use this sold reference

Treat the published scope as a benchmark, then move directly into similar-machine screening, delivery timing and support review.

Best fit buyer route

Process fitCommercial fitMedia review
  • Good for buyers who want a newer used CTL option instead of starting from a full new build.
  • The 19-roll leveling setup matters more here than headline width alone.
  • Use this listing first when stainless sheet flatness and cleaner sheet output matter.

Product FAQ

Questions buyers usually ask about this machine

Can Coilmill source a similar 1050mm stainless steel cut-to-length line?

Yes. Send stainless grade, coil width, thickness range, sheet length and flatness target so Coilmill can check similar used CTL options.

What should be confirmed on a used stainless CTL line?

Confirm leveling roll condition, sheet length range, cutting section, electrical controls, stacking scope and whether recent running proof is available.

What model details matter most on this Used 1050mm Stainless Steel Cut-to-Length Line, 2022?

Check working width 1050mm, thickness range to be confirmed, 4-layer 19-roll leveling machine, shear section, control system to be confirmed and stacker scope.

Can this Used 1050mm Stainless Steel Cut-to-Length Line, 2022 match stainless or carbon steel work?

Confirm the material range, leveling capacity, sheet length target and whether the line still has recent running proof with the same material class.

What should still be reconfirmed on this Used 1050mm Stainless Steel Cut-to-Length Line, 2022 before quotation?

Reconfirm manufacturer Quanfa, year 2022, control system to be confirmed, roll-section condition and stacker scope before moving to quotation.

How should buyers use this sold Used 1050mm Stainless CTL Line page?

Use the published specs as a reference for similar-machine sourcing, not as a currently available offer. It is published as a sold reference (sold in May 2026, destination 🇻🇳 Vietnam). Send your target width, thickness range, coil weight and destination for a similar used machine check.

Confirmed Specs

Published technical information

Only confirmed parameters are shown here. Any omitted item should be rechecked before quotation or contract discussion.

Year2022
ManufacturerQuanfa
Working Width1050mm
LocationFoshan Sanshui, China
Pending confirmation before quotation: Thickness Range, Coil Capacity, Line Speed, Drive / Control.

Sold Reference Review

How this sold machine should guide the next buying decision

This page is no longer a live stock page. Use the confirmed sold scope to compare current inventory, similar-machine sourcing and whether a broader project route should be reviewed.

used cut-to-length line scope review visual
Sold Reference
What this sold reference proves

This sold Used 1050mm Stainless CTL Line page should be used as a demand-validated benchmark for similar-machine sourcing.

  • It was listed in October 2025, sold in May 2026, public destination 🇻🇳 Vietnam.
  • Use the published 1050mm, process range and coil scope as the first benchmark before asking for similar stock.
  • A separate sold case page is also available if your team wants the same reference in a cleaner case format.
  • Manufacturing year reference: 2022.
Confirmed demandPublished scopeSimilar sourcing
used cut-to-length line scope review visual
Compare Scope
What to compare on a similar machine

On a similar cut-to-length line, compare leveling section condition, sheet length target, shear and stacker scope, control system and whether the published material range matches your project.

Technical fitCommercial riskInspection review
used cut-to-length line scope review visual
RFQ Inputs
What to send before asking for similar stock

Start the first RFQ with Material type, coil width, thickness range, sheet length and flatness target; Destination country, preferred delivery timing and how close the replacement machine must be; Whether you want similar used stock only or also want refurbishment and new-equipment comparison included.

Target processDestinationTiming

Use sold references to shorten the next RFQ

Sold pages should not be treated as dead ends. They show what machine size, process range and support scope already attracted a buyer, which makes the next inquiry more specific and commercially stronger.

Similar used equipment

Compare similar used equipment options before deciding whether this machine fits your material, process and installation plan.

Related buying guides

Use these guides to prepare inspection questions, review technical risk and decide whether refurbishment support is needed before purchase.

How to move this listing forward

Used equipment availability can change quickly. Send the core production requirement, preferred inspection timing and destination country first so current condition, supplied scope and export support can be checked before quotation.