Use sold references to shorten the next RFQ
Sold pages should not be treated as dead ends. They show what machine size, process range and support scope already attracted a buyer, which makes the next inquiry more specific and commercially stronger.
Sold Reference Used Slitting Line
Used 1050mm Full Hydraulic Slitting Line, 0.3-3.0mm
Suitable for cost-sensitive thin-gauge metal coil slitting projects. Current location: China. Inspection can be arranged before quotation.
This is a sold reference. Review the confirmed specs, then move to similar-machine sourcing instead of treating it as currently available.
See confirmed specs or review media and commercial notes first.
Sold Reference
Sold reference | Sold in February 2026 | 🇵🇰 Pakistan
Manufactured in 2015
Listed in October 2025
Photos available
Inspection available
Refurbishment support
Quick fit check
Suitable for cost-sensitive thin-gauge metal coil slitting projects
1050mm0.3-3.0mm16TChina
What this listing covers
This used 1050mm full hydraulic slitting line was manufactured by Guangdong Hongjia.
- The line is listed as a 0.3-3.0mm slitting machine with 16T coil capacity, 150mm slitter shaft, tail shear, offline scrap edge winder and DC motor drive system.
- Because the equipment was manufactured in 2015, confirm current condition, available inspection details and any refurbishment requirements before purchase.
- Full hydraulic slitting line
- 150mm slitter shaft
- Tail shear
- Offline scrap edge winder
- DC motor drive system
Used equipment, configuration to be confirmed before purchase.
Commercial Review
Best fit for
Suitable for cost-sensitive thin-gauge metal coil slitting projects.
Application fitProcess rangeCommercial match
What to confirm before quotation
Confirm current running condition, supplied scope and any missing technical data before moving to quotation.
Current conditionMissing dataQuotation prep
Included scope to verify
High configuration according to the source material.
Included PartsElectrical ScopeInspection Notes
Refurbishment Support
Need refurbishment review before shipment?
Coilmill can review electrical, hydraulic, roll, knife, bearing, auxiliary-section, dismantling and loading scope before quotation.
- Inspection before purchase
- Electrical and hydraulic review
- Refurbishment scope before shipment
- Dismantling and loading support
Buyer Route
How buyers should use this sold reference
Treat the published scope as a benchmark, then move directly into similar-machine screening, delivery timing and support review.
Best fit buyer route
Process fitCommercial fitMedia review
- Suitable for cost-sensitive thin-gauge metal coil slitting projects
- Review 1050mm and 0.3-3.0mm first.
- Use the published media to decide whether a deeper review is justified.
Product FAQ
Questions buyers usually ask about this machine
Can Coilmill source a similar 1050mm hydraulic slitting line?
Yes. Send strip width, thickness range, coil weight and tooling expectations, and Coilmill can check similar used hydraulic slitting line options.
What should be checked before buying a similar used slitting line?
Check slitter shaft condition, motor power, recoiler condition, tooling scope, electrical cabinet, hydraulic system and whether a running video or inspection can be arranged.
What model details matter most on this Used 1050mm Full Hydraulic Slitting Line, 0.3-3.0mm?
Check working width 1050mm, thickness range 0.3-3.0mm, slitter shaft and knife scope, recoiler power 132kW and whether the running video matches the current machine condition.
Can this Used 1050mm Full Hydraulic Slitting Line, 0.3-3.0mm fit my strip program?
That depends on your strip count, finished strip widths, coil weight 16T and tooling scope. Send those details so Coilmill can check process fit before quotation.
Which listed details on this Used 1050mm Full Hydraulic Slitting Line, 0.3-3.0mm should still be reconfirmed before deposit?
Reconfirm manufacturer Guangdong Hongjia, year 2015, control scope DC motor drive system, tooling completeness and whether the published motor data still reflects the current machine setup.
How should buyers use this sold Used 1050mm Hydraulic Slitting Line page?
Use the published specs as a reference for similar-machine sourcing, not as a currently available offer. It is published as a sold reference (sold in February 2026, destination 🇵🇰 Pakistan). Send your target width, thickness range, coil weight and destination for a similar used machine check.
Confirmed Specs
Published technical information
Only confirmed parameters are shown here. Any omitted item should be rechecked before quotation or contract discussion.
Year2015
ManufacturerGuangdong Hongjia
Thickness Range0.3-3.0mm
Working Width1050mm
Coil Capacity16T
Uncoiler Motor15kW
Slitter Motor55kW
Recoiler Motor132kW
Drive / ControlDC motor drive system
LocationChina
Equipment Photos
Need a running video?
Photos are published on this page, but a running video is not shown here. Ask for the newest video, inspection timing and current operating condition if your team needs a deeper review before quotation.
Photos availableRunning video on requestInspection support available
Send Inquiry
Sold Reference Review
How this sold machine should guide the next buying decision
This page is no longer a live stock page. Use the confirmed sold scope to compare current inventory, similar-machine sourcing and whether a broader project route should be reviewed.
What this sold reference proves
This sold Used 1050mm Hydraulic Slitting Line page should be used as a demand-validated benchmark for similar-machine sourcing.
- It was listed in October 2025, sold in February 2026, public destination 🇵🇰 Pakistan.
- Use the published 1050mm, 0.3-3.0mm and 16T as the first benchmark before asking for similar stock.
- A separate sold case page is also available if your team wants the same reference in a cleaner case format.
- Manufacturing year reference: 2015.
Confirmed demandPublished scopeSimilar sourcing
What to compare on a similar machine
On a similar slitting line, compare slitter shaft size, tooling completeness, recoiler power, hydraulic condition, electrical cabinet status and whether the running proof still matches your strip program.
Technical fitCommercial riskInspection review
What to send before asking for similar stock
Start the first RFQ with Target strip widths, thickness range, coil weight and slit-count expectation; Destination country, preferred delivery timing and how close the replacement machine must be; Whether you want similar used stock only or also want refurbishment and new-equipment comparison included.
Target processDestinationTiming
Similar used equipment
Compare similar used equipment options before deciding whether this machine fits your material, process and installation plan.
Related buying guides
Use these guides to prepare inspection questions, review technical risk and decide whether refurbishment support is needed before purchase.
How to move this listing forward
Used equipment availability can change quickly. Send the core production requirement, preferred inspection timing and destination country first so current condition, supplied scope and export support can be checked before quotation.